Saturday, 22 June 2013

(Allegedly) Fail Proof Mead Recipe

This is a recipe from the 'Got Mead' website, hopefully they won't mind me reproducing it below.
I mentioned that we have tried to make mead before and failed to make anything drinkable. Hopefully this one will come out more drinkable. I am intrigued by fruit and country wines, but our experience so far is not good. I can't quite give up yet though! They are much less satisfying than beer to make though as the turn around is so slow.


Ingredients

3 1/2 lbs Clover or your choice honey or blend (will finish sweet)
1 Large orange (later cut in eights or smaller rind and all)
1 small handful of raisins (25 if you count but more or less ok)
1 stick of cinnamon
1 whole clove (or 2 if you like - these are potent critters)
optional (a pinch of nutmeg and allspice)(very small)
1 teaspoon of Fleismanns bread yeast (now don't get holy on me--- after all this
is an ancient mead and that's all we had back then)
Balance water to one gallon

Methods/steps
This is one I have shared before but it may have got lost in the rebuild. It is so simple to make and you can make it without much equipment and with a multitude of variations. This could be a first Mead for the novice as it is almost fool proof. It is a bit unorthodox but it has never failed me or the friends I have shared it with.Process:
Use a clean 1 gallon carboy
Dissolve honey in some warm water and put in carboy
Wash orange well to remove any pesticides and slice in eights --add orange (you can push em through opening big boy -- rinds included -- its ok for this mead -- take my word for it -- ignore the experts)
Put in raisins, clove, cinnamon stick, any optional ingredients and fill to 3 inches from the top with cold water (need room for some foam -- you can top off with more water after the first few day frenzy)
Shake the heck out of the jug with top on, of course. This is your sophisticated aeration process.
When at room temperature in your kitchen. Put in 1 teaspoon of bread yeast. (No you don't have to rehydrate it first-- the ancients didn't even have that word in their vocabulary-- just put it in and give it a gentle swirl or not)(The yeast can fight for their own territory)
Install water airlock. Put in dark place. It will start working immediately or in an hour. (Don't use grandma's bread yeast she bought years before she passed away in the 90's)(Wait 3 hours before you panic or call me) After major foaming stops in a few days add some water and then keep your hands off of it. (Don't shake it! Don't mess with them yeastees! Let them alone except its okay to open your cabinet to smell every once in a while.
Racking --- Don't you dare
additional feeding --- NO NO
More stirring or shaking -- Your not listening, don't touch
After 2 months and maybe a few days it will slow down to a stop and clear all by itself. (How about that) (You are not so important after all) Then you can put a hose in with a small cloth filter on the end into the clear part and siphon off the golden nectar. If you wait long enough even the oranges will sink to the bottom but I never waited that long. If it is clear it is ready. You don't need a cold basement. It does better in a kitchen in the dark. (like in a cabinet) likes a little heat (70-80).
If it didn't work out... you screwed up and didn't read my instructions (or used grandma's bread yeast she bought years before she passed away). If it didn't work out then take up another hobby. Mead is not for you. It is too complicated.
If you were successful, which I am 99% certain you will be, then enjoy your mead. When you get ready to make a different mead you will probably have to unlearn some of these practices I have taught you, but hey--- This recipe and procedure works with these ingredients so don't knock it. It was your first mead. It was my tenth. Sometimes, even the experts can forget all they know and make a good ancient mead.
Enjoy, Joe
-- submitted by Joe Mattioli

Curing a rabbit skin (bit gross pics)

1 rabbit skin
1 liter of cold water
30ml salt
30ml alum

You need to flatten the skin out as it probably has a neck and little legs where it was removed from the rabbit like a jumper. Just cut through each place. You can neaten it up later. You don't need to try to clean it up at this stage either.

Rinse the skin in cold water as soon as it is off the rabbit to cool it quickly and get any blood off the fur.
Mix the water, salt and alum in a bowl or bucket that is a bit over a liter in size (ie big enough for the water and the skin).
Gently squeeze water out of the skin and put it in the curing liquid. Mix it all around to make sure the whole skin is soaked in the liquid. Put a plate or something on top to keep the skin under the surface.
Leave like this for 48 hours stirring occasionally to make sure the skin is evenly processed.
After 48 hours remove the skin - let as much of the liquid drain back in to the container as possible as you still need it.
You should now be able to peel off the membrane from the skin relatively easily. Do this from all over the skin. You can use a knife as required but the skin is quite fragile so be careful.
Add an additional 30ml of alum and of salt to the liquid. Stir until dissolved and return the skin to the container for further 7 days.
After 7 days check to see whether the curing is complete by boiling a small piece of the skin. If it goes hard and curls up then return the skin to the solution for another few days. The piece of skin should not change much when boiled if it is fully cured.
When it is done remove drain as much liquid as you can from the skin. Then wash it in cold water and wash the fur side with a mild soap. Rinse thoroughly and put on a rack to dry (or peg to clothesline or whatever).
When it is almost dry rub some oil (I use sunflower oil - thinking about adding some essential oil one time) in to the skin and start stretching it until the leather goes soft. If it dries out to much spray it with a plant mister and continue stretching. Each piece you stretch should turn from a translucent off white to an opaque white. Keep doing this until the skin is soft and dry. Brush the fur with a gentle brush and you are finished!

The skin side (with interested dog)
The fur side
Now you need to decide what you are going to do with the skin. One skin won't make much of a hat!

Cherries and cherry sorbet

We thought the sheep had killed a number of trees in the orchard by eating their bark. Mostly we didn't mind because they did not have fruit last year or the fruit wasn't very good.
We noticed the other day lots of red things in one of the trees. They were cherries. The tree seemed to have survived despite a bit less bark (it looks like maybe the sheep just had a thin layer of the surface, not anything important) and decided to fruit this year. The fruit were lovely and juicy although not very strong flavoured, it has been a very very very very wet spring so we are not sure if that has perhaps adversely affected their flavour - we have giving it another chance anyway and will see how it turns out next year.
I picked a lot of fruit in the pouring rain and made cherry sorbet. The weather has been very variable, I am sure we will appreciate it sometime during the summer.

I stoned them with a cherry destoner - bought to help with the mini plums last year - haven't had a change to try it. Possible the plum will turn out to be too well attached to the flesh and too bit - but it worked very well for cherries
Then heated them gently in a pan until soft. I put them through the mouli (sieve would do too) then added juice of a lemon, and enough sugar to taste like sorbet and put in the sorbet maker.

Saturday, 15 June 2013

Honey Ale/Mead

The nettle beer bubbling away on the table inspired me to wonder what other fruit/plant 'beers' we could try. I haven't found and other ideas to try yet, but I came upon mead several times during my search. We tried mead a couple of years ago. We still have it (out of scientific interest) although it was frankly one of the most unpleasant tasting things I have ever tried. It felt like it was ripping the inside of your throat out as cheap whisky does, but then left a much more unpleasant after taste. After two and a half years it has 'mellowed' so that some of the throat ripping sensation is gone, but there is still a little burning and an unpleasant taste that isn't at all remenicent of honey as mead is meant to be.
I am thinking of giving another batch a go as so many people seem to find it a very pleasant drink. 
However before that I fancied trying a honey ale (or maybe it is a mead as it doesn't have any grain in it...) which being lower alcohol should be ready to drink sooner and perhaps has less scope to go wrong... perhaps... we shall see.

Makes approx 4.5 litres

1 gallon fermenting container (with airlock preferably)
400g honey
20g hops (I am using Willamette - they are a bit old)
1 lemon (zest and juice)
1tsp yeast (i used Safale us-05 dry ale yeast as that is what we happened to have - but some people use bread yeast)
25g of sugar for priming (adding the fizz)
Approx 1.5 litres boiled and cooled water
3 litres of boiling water

Boil 1 litre if water and let it cool down somewhat (maybe below 70C), dissolve the honey in it and put in fermenting vessel. The boiling it before hand is to sterilise it.
Boil 3 litres of water and add the lemon zest and 15g of hops, boil for 30 mins
Turn off the heat and add the remaining hops, stir and leave for 1 min
Strain (through a sieve is fine - or a cloth) in to the fermenting container and discard hops and lemon zest
Top up container to to 1 gallon (4.5 litres) with water you have boiled and cooled (should be a few inches from the top of the container)
When cool add the lemon juice and yeast
Leave until fermentation is complete 
Syphon in to a clean container and add 25g of sugar dissolved in a little boiling water
Bottle and leave for a few days for fizz to develop before sampling. 
According to mead buffs 3oz of honey in 1 gallon gives 1% alcohol, so 400g (14oz) should be between 4 and 5%. 
My original gravity reading was 1022 which seems quite low - it is hard to get the liquid out of the demi john to try the reading again so I will just leave and see what happens.

I will update shortly...



Thursday, 13 June 2013

Pork Chops with Juniper and Thyme

We had our first BBQ of the year yesterday. We couldn't remember if we have had one since we killed the pigs. I don't remember BBQing our own pork anyway.
This could be fried or grilled as well.

2 pork chops
1 tbl sp juniper berries
1 tablespoon olive oil
1 tsp balsamic vinegar
1 tbl sp chopped thyme
Salt and pepper

Squish the juniper berries in a pestle and then add everything else except the chops and smoosh around more until you have an oily pulp
Smear the pulp on both sides of each chop and leave to marinade for a few hours

BBQ, grill or fry until well browned. Nice served with apple slices.


Nettle Beer

We have so many nettles it sounded like an interesting thing to try... it is raining today, so it was something we could do mostly indoors (Doug and Poppy braved the elements to collect the nettles and I made the brew)

1 large bag stuffed with nettles (some recipes say 1kg)
5 litres if water
430g of sugar for brewing
20g of sugar for secondary fermentation in the bottles
Juice of 2 lemons
50g cream of tartar
1/2 sachet of beer or cider yeast
Large pan (approx 10 litres or more)



Cram the nettles in to a pan with the 5 litres of water. It might be a tight squeeze, but as soon as they start cooking they pack down a lot.
Bring to the boil (can take some time) and boil for 15 mins
Strain the liquid in to another pan or bowl
Mix in the 430g of sugar and stir until dissolved
Add the cream of tartar and lemon juice then leave to cool
Pour in to a demi john and when the liquid is cool enough add the yeast (follow yeast packet instructions for starting and pitching temperature)
Add an airlock and leave until fermentation completes (3-5 days or possibly more depending on temperature)
Syphon out of the demi john (leaving the yeast residue behind) in to a container (pan, bowl etc)
Melt the 20g of sugar in a little boiling water and add to the liquid.
Bottle and cap as you would for beer.
Ready to drink in a few days.

I was thinking it might be a bit greener - I suspect it might be if the nettles were boiled less... apparently boiling damages the chlorophyll. I will let you know how it tastes in a while. Initial indications aren't too great :)

Peach Sorbet Recipe

This is a good way to use up peaches that aren't very ripe. Better if they are tasty though.

3 peaches chopped in to pieces
100-200g sugar (depending on sweetness of peaches)
Juice of one lemon

Put the peaches in a pan and heat gently until they are soft. You need to start on a low heat until some juice comes out
Add sugar until you are happy with the sweetness
Liquidise the mixture. You can leave some lumps or blast until really smooth
Put in ice cream maker until done